Product Catalog

In our extensive line of products, we offer stainless steel sheets and stainless steel plates. The stainless steel sheet is typically sold in the annealed condition and available most grades. Polished surfaces range from the standard #4 to a mirrored finish #8 and are usually covered with a removable vinyl coating. We manufacture our standard sheet sizes to include 4’ x 8’, 4’ x 10’, and 5’ x 10’, but customized sizes are also available.

Our stainless steel round bar is generally sold in the annealed condition, although some grades such as 17-4 or certain 400 series grades may be hardened by heat-treating. The standard length for most size round bars is 12’-14’ random lengths, but lengths are available in some sizes up to 20’ and longer

Our stainless flat bar products are divided into two primary groups – a true flat bar and a sheared and edged bar. A true flat bar is usually in the HRAP condition though it may sometimes be cold drawn. This bar has fairly sharp corners and tighter tolerances on thickness and width than sheared and edged and is often used by fabricators where the finished project is polished.

Our hot-rolled annealed stainless steel angle is offered in both equal and unequal leg lengths. This product is ideal for structural applications that require strength and durability as the inside radius corner reinforces the shape. The steel angle also offers exceptional corrosion resistance for environments that are acidic, chemical-heavy, and even freshwater or saltwater saturated.

Round stainless steel tubes and tubing can be provided as both a welded and a seamless product. Using a welded tube is typically a more cost effective option for use in low pressure, ornamental, and structural applications. Some welded sizes come pre-polished to an 180 grit (similar to a #4), but we can have all tubing custom polished per your specifications. The seamless tube, on the other hand, should be used in high-pressure applications.

When it comes to cutting steel plates, the options are almost limitless. Plasma or Waterjet stainless steel cutting each have their own advantages and disadvantages, and Atlantic Stainless is happy to work with you to achieve the exact specifications for your project. We work with customers from various industries to deliver custom and specified products on time.

We supply stainless steel beam and channel products to companies and industries all over the world. Our beams can be cut to size and supplied with a polished finish to meet the exact specifications of your stainless steel structural requirements.

We supply stainless steel hardware to companies and industries all over the world. Whether you are looking for bolts, nuts, washers or more we offer the correct accessories to meet the exact specifications of your stainless steel structural requirements.

Our stainless steel hex bar or hexagon bar is supplied in the cold drawn condition and can start as small as 1/8” in size and go up to 3” in size. Bars usually come in 12’ lengths, but can also be ordered cut to size.

Our supply of stainless steel square bars come in both the cold drawn and hot rolled condition. Most of our square bar products 3″ and under is cold drawn, although it can be hot rolled. Cold drawn bar is shinier in appearance and has a tolerance that is similar to the hot rolled material, which is usually oversized. Most of our square bar is supplied in 12’ random lengths but can be cut to size for orders.

Our supply of stainless steel square tube and rectangular tube offerings are available in a wide variety of sizes and wall thicknesses. They are supplied in both mill finish and polished finishes, with the polished finishes including #4, #6 and #8 mirror finish. They are generally supplied in 20’ random lengths but can be cut to size for orders.